| This large locking drop box provides a convenient means for the secure deposit of anything from payments to video tapes. It has several options, including variety of finishes, custom lettering, mounting posts, and spreaders for mounting more than one on a post. The difference between the Oasis Mailbox and Oasis drop box is that the Oasis mailbox has a flag. Click
More Photos to view details. Technical Specifications:
- Body: 16 gage (1.5 mm) steel sheet
- Doors: 14 gage (2.0 mm) steel sheet
- Assembly Hardware: Stainless steel rivets and hinges. Zinc plated assembly screws.
- Lock: Zinc plated cam lock with zinc die cast cylinder with two keys
- Large incoming hopper style door design to allow delivery of small to medium sized parcels
- P-Type rubber door seals prevent rain and dust from entering the mail storage compartment
- Finished in a high quality durable powder coat in gray, sand, black, white and bronze.
- Assembled almost exclusively by spot welding and welded lap joints to eliminate unsightly rivets on the outside surface
- Includes all hardware and instructions
- Mount on a post or inset in pilaster, column or wall.
- 43 lbs
Lettering
- Personalize your drop box with up to six 3" characters on the front and up to sixteen 1 1/2" characters on the flag side.
NOTE: Up to 2 lines of 12 characters can be added on the front of the box.
However, the lettering will be smaller than 3 inches. For more than six characters on the front door, send an email to info@addressnumbers.com or call us at 866 309-2013 for custom setup.
Post
The Oasis standard post is constructed of heavy gauge steel and is available in the same durable powder coated finish colors as the Oasis drop box and mailbox. (This post can be used with either of our Oasis boxes: the Oasis Mailbox and the Oasis Drop Box.) The post can be either an in ground post or a surface mount post. Oasis Post Details: The post is a 14 gage (2 mm) steel tube. The post is constructed of 4" square cross section steel tubing with a mounting plate welded to the top (in ground) or on both the top and bottom (surface mount version). In other words, the post can be installed in the ground in concrete or bolted to a surface. The mounting plate bolt pattern is 4" x 10". The assembly hardware is provided: zinc plated assembly bolts and nuts. Multiple mailboxes can be mounted on the Oasis post by using Spreader Plates (see Accessories on the right). Click on More Photos (above) for specification drawings. |
